Guide

Making water safe: boil, bleach, filter

The CDC's three methods, in the order it ranks them, with the exact amounts.

Checked November 2026

Follow your local authority first. If a notice says the water has chemicals or toxins in it, none of these methods makes it safe. Use bottled water.

1. Boil

Bring clear water to a rolling boil for one minute. Above 6,500 feet, boil for three minutes. Let it cool and store it in clean, covered containers. The CDC ranks boiling first because it kills bacteria, viruses and parasites.

2. Disinfect with bleach

WaterUnscented household bleach, 5% to 9%
1 gallon, clear8 drops, a little less than 1/8 teaspoon
1 gallon, cloudy16 drops, or 1/4 teaspoon

Mix well and wait at least 30 minutes before drinking. Use plain unscented bleach only.

3. Filter

The CDC's guidance is that most portable filters do not remove viruses, and that you should choose one labeled to remove parasites. Hollow-fiber filters rated at 0.1 micron, such as the Sawyer Squeeze, are sold as removing bacteria and protozoa. A filter is a good first step for cloudy water and a poor only step when viruses are a concern. Filter, then disinfect.

For stored tap water

Tap water stored in a clean, sealed container before an emergency is generally fine to drink. The CDC says to replace water you filled yourself every six months. Treat it if you are unsure.

Stow & Carry is developing its own kit. See what is planned, or read on: all guides.